Видео

2022 wrangler, allen head won’t turn, had to heat allen head with torch, 25 seconds, then work fast before the locktite set back up, got it done, took about 1/4 turn

Great job....

So I’m doing an 8.5 and I over-crushed the sleeve to about 40, I’m gonna try to do what you said about backing off the nut a bit but wouldn’t that make it a little sloppy?

Thank you so much for your knowledge! With your help, we were able to fix our Charbroil for $35

I’m have to give this a shot

Any way to show the install? Is there anything else you need to buy?

JK the same ?

Great video. Thanks for the tip about facing the flame carriers forward. It's a small detail that really does make a difference, and is perfect for the reason you mentioned of searing meat, and have the stronger flame toward the front.

Great video, nice and slow and you point out everything. I just bought mine, so thank you for all the tips that you gave us and it's so nice not to compete with loud blasting music while you talk like other videos. Lol. Aloha and have a great day..

Will the front work with the lights, I have the standard sport NOT the s model like yours, 🤔 thanks Jim

Never mind the slop…. My stock box is making noises.. I hope it is the gear box

What method do you use to remove the small carrier bearing on a m220?

Great tip

What tires do you have? BFG KM3?

Why it’s not working with me 😡😡😡😡😡

Thank you brother. I was not sure and you cleared my thoughts

I’ve been a Tacoma guy more yrs than I have finger and toes, long story short just got a 2023 Gladiator. WOW! What a vehicle! Got it for it “Towed” ability behind a RV. But it such an Awesome truck! Hope it hold up as well as a Toyota!

See the Supreme Suspension and Tacoma Lifestyles, version of their trailer hitch skid plates both come with a place for D-rings…for shackles

I found another workaround.. its much more expensive but the result is great! Order a Bronco Wilktrak and after a 35 month wait you will never want to drive a Jeep product again! lol

Is this problem considered a Racal or a warranty cover problem….

Note, the grill hole for air intake on a gladiator, when driving in a snow storm WILL ice up and caise your glady to get real slow on the highway, chokes off the air supply significantly. No joke, the first bend in the tube feom the grill as it goes back clogs up with ice and snow, bad design. Only when driving during falling snow or ice storms.

These bbq are so cheaply made with paper thin metal, they just rot in a couple of years.

The most helpful video. Thank you

Good information, I know this is a 4 year old video, but I recently bought a JT, and I like to get every bit of info I can on my 4x4s. I used to have a 2008 Nissan Titan. One thing that is cool about the Nissan version of these Dana 44 axles is that they are screw adjusters instead of shims. I put a Yukon Grizzly locker in mine and screw adjusters make it easy to set back lash. Yukon doesn't make that version anymore for the Nissan, but I digress.

and what happens if the steering wheel is center but the car drives to one side of the road

Love the 671 sticker! Hafa Adai

On your next build, have the main caps reamed to 1/2 and the block rethreaded to accept 1/2" studs. Have it align honed. That will reduce cap walk. The girdle will decrease it, but the cap can still walk because of the clearance between the cap bore and the 7/16" bolts you're using. And the DSS unit is the best EVER.

I'm new on your channel and I just got my first jeep gladiator and I'm so impressed how it handles I think they went the extra mile to make this truck very strong and fun to drive thank you for the info 👍 God bless 🙌

I owned one of these for 6 months. Of that 6 months i had a courtesy car for 4 months. Nothing but problems on the one i had. Horrible experience.

Hope nobody confuses this for an actual alignment. These steps will not change the actual alignment. It is only about centering the wheel. The Jeep can track straight with a good alignment and have the steering wheel off center and a Jeep can have bad alignment with the steering wheel centered.

Can you drive slow with the bokt loose, make adjustments, and then tighten it up fully once adjusted properly?

The reason the steering is off center is because the axle shifted off center. You should center the axle first, then center your steering wheel.

How about a crush collar delete, are they worth getting?

Thanks brother! Saved me around $200 not using a electric winch and hours of setup time.

Torque the wheels also, don’t use an impact gun

What was redline on this build?

Thank you very much. Simple and easy to understand video.

some great info. thx. didn't know where the 2nd battery was.

Beautiful Punk'n ! Swapped my 2020 Punk'n Rubicon for a faster Punk'n 2023 Punk'n Mojave... I Love the orange..

Nice video. What brand did you go with for gears? Thanks!

When I drive and put the steering wheel straight it goes to the left! In order to go straight I need to turn the steering a little bit to the right .. is this the reason?thanks in advanced

I have been searching for a good spot to mount my air compressor on a 1999 jeep Cherokee. I recently upgraded to an alternator from a 4.7 v8 and it has an extra leg on the back, in a similar location as where you put your compressor... I think that might be a good spot as well! Thanks for the idea!

where did you get the sub enlosure from?

Just picked up a 2018 JLUR yesterday and the steering sucked. Just made this adjustment and it fixed it!!!! THANK YOU!!!!

Did you do 35 spline front and rear?

I heard that if you get only 1 inch spacers, you need to cut the lug on the truck in order to fit the wheels? is this true?

Great info

Hey. First off very good video. I learned some things I didn’t know. Very informative keep it up and appreciate the info thanks 👍

This worked on my 2018 JLU. Thank you

Some facts to consider, a 10,000 lb winch with 4 layers of cable/rope losses 20% right off the start, then -15% for friction around the pulley/snatch block after all that realistically with a full drum max pulling range is around 6.7 ton. Having said that wether or not you use the snatch block, always run the winch line out as far as possible saving winch life.